DESCRIPTION
Bioforcen pressure distribution system provides two objects in contact surfaces of the surface pressure measurement and analysis tools, fast, intuitive characterization of the size and distribution of pressure.
· An efficient and convenient access to the distribution of surface pressure on the contour graph;
· Accurately measured surface pressures on the specific numerical size;
· A powerful software system for stress analysis and processing, visual display of pressure distribution of the three-dimensional contour map, showing the path of the two-dimensional graph, providing a total area of pressure, the pressure to provide customized analysis reports.
System consists of
·Pressure distribution unit:
Using thick film technology production, the highest density of up to 1,4,9 lattice points / cm, the thickness of the thinnest up to 0.2mm, the basic area of 400mm × 400mm, larger sizes can be integrated, but also can be designed into a variety of shapes.
·Information processing acquisition unit:
Using high-speed matrix switch circuit, field bus systems, precise system timing and data synchronization method, high-speed acquisition, channel sampling frequency 0-250Hz, USB interface.
·Software system:
Analysis software to complete real-time multi-sensor data acquisition, display, storage, and to achieve normal document processing, contact the image depicts, histogram pressure map, the ratio map, based on the timing of the gait parameters, the total center of pressure trajectory, sub-center of pressure trajectory, etc. calculation and analysis capabilities.
·Project expert system based entirely on the needs of specific sports training model Construction, Gait analysis and definition of parameters characteristic parameters of the extraction, real-time test data based on timely feedback and coaching functions.
Selection table
|
Model Picture Specification Uses |
| PD20301 |
 |
200×300mm
Dot Density:1/cm2
Cloth flexible substrates |
Teaching Demonstration Experiment |
| PD4040 |
 |
400×400mm
Dot Density:1，4/cm2
Digital,Rigid Substrate |
Balance, one leg gait, shoe comfort testing, orthopedic assessment of foot |
| PD4040S |
 |
400×400mm
Dot Density: 1，4，9/cm2
Digital,Scalable Cloth
flexible substrates |
Chairs, sofas, tires tread,
Cylinder pressure, data gloves,
Seal / occlusion pressure |
PD40100
PD40200 |
 |
400×1000mm
400×2000mm
Dot Density: 1，4/cm2"
Digital,Rigid Substrate |
Gait cycle pressure distribution tests, cerebral palsy,Hemiplegia, abnormal gait rehabilitation diagnosis,
Prosthetics |
| Insoles |
 |
Custom Size
Dot Density ：1，4/cm2
Switch volume / Digital
No basement |
Rehabilitation, sports mobile gait detection, digital running shoes for walking, marathon walk cycle parameters Test and Evaluation |
| Digital Track |
 |
Custom Size、Dot Density The amount of pressure switches, plastic runway
Needs at least one measuring station platform |
Long jump, high jump, sprint, hurdles track and field events such as walking speed, stride frequency, step length, supporting phase / phase parameters of test and evaluation vacated |
The pace of
Training
Equipment |
 |
Custom Size、Dot Density Pressure Switch volume / Digital
Flexible substrates |
Martial arts, boxing, taekwondo experimental science museum |
DG40200
E-Trail |
 |
length：2M,3M
Dot Density ：1/cm2
Pressure Switch volume Can be upgraded to digital, hard substrates |
Gait cycle assessment expert system, rehabilitation and diagnostics, prosthetics, sports testing |
|
APPLICATIONS
The JPD4040 model Biomechanics Pressure Map can be used for biomechanics, engineering, medical research, orthopedics, rehabilitation evaluation, prosthetics, and general industrial uses. Specific uses include gait analysis, stability analysis, neurological analysis, prosthetics fitting, athletic performance, shoe design, and force, power, and work studies.
AMPLIFICATION
JPD4040 provide both temporal and spatial gait parameters. It is embedded an array of switches running across and along the length of the mat. As a person walks down the mat, the switches close under the feet, enabling the computer to calculate the timing of each switch closure. Since the geometry of the mat is known, the spatial parameters of gait can be calculated. These amplifiers process the transducer signals and provide outputs suitable for an A/D converter so that the data can be stored and processed by a computer.
CALIBRATION
Each pressure map is inspected and tested in BIOFORCEN calibration facility. The calibration procedure provides a detailed sensitivity level and a complete test of all system components, including the amplifier and the connecting cable if ordered together.
SOFTWARE
Automated data collection and reduction requires a computer and software. BIOFORCEN-Analysis, BIOFORCEN software package, is specifically designed for biomechanics applications. It provides quick and easy hardware setup and automated data acquisition and analysis. BIOFORCEN -Analysis allows the user to quickly begin testing rather than take on the tedious and lengthy process of writing data acquisition and reduction routines. The BIOFORCEN -Analysis software package is available separately or combined in one of BIOFORCEN Systems.
BIOFORCEN SYSTEMS
Systems are complete gait and balance analysis systems. Each system consists of transducers, amplifiers, cables, A/D converter, and BIOFORCEN -Analysis analysis software, all sold at a special system price.
CUSTOM
BIOFORCEN also offers special pressure measured instrument to meet your specific needs. Units are available in various sizes, load capacities, sensitivities, and materials. Contact BIOFORCEN for any custom requirements.